-
Q Regarding the curved tip/ olecranon tip , is this workable for all the reload model?
A Yes, the other model without white reload need be customized in advance, the production time take 20-25 days.
-
Q What’s the different between the Microcure genernation I stapler and genernation II stapler?
A For stapler equipment:
1.The genernation I stapler loading/unscrew button designed at the connection part between the component and the body.It is easy to slip when changing the nails during the operation, resulting in a waste of costs during the operation and hindering the operation. Therefore, we have made certain improvements on this basis. At present, the second genernation II loading/unscrew button is designed on the body to solve the above-mentioned problems.
2.The generation I stapler steering knob uses a gear-breaking design, the generation II was changed to a pinball design steering knob, which is smooth to use, and has a better experience.
For reloads:
1.The genernation I reload has a spindle design in the front end of the nail seat and nail chamber. The second-generation nail cartridge is changed to a drop-shaped nail slot, and the B-shaped nail is fully completed, which makes the tissue after the suture better air-tight and has a better hemostatic effect. At the same time, we also upgraded the non-integrated nail seat to an integrally formed one. Nail holders provide better products for clinicians and patients.
-
Q Could Microcure endoscopic linear cutter stapler reloads could compatible with Medtronic staplers ?
A Yes, but we suggest use orginal compnents and stapler collocation, the experience is be better.
-
Q How could ensure Microcure endoscopic linear cutter stapler and reloads the anatomosis intactly., no bleeding?
A Microcrue mean time done the corresponding preesure lab test,The anastomosis should bear no less than 3.6x10³Pa pressure.
-
Q What’s the color meaning of different reload staple height ? Applicable for which surgeries
A Green reload(4.8mm):Main bronchus, lung lobes
Blue reload (3.5mm):Tissue of general thickness, gastrointestinal digestive
White reload(2.5mm):Vessels above 5mm and small intestine under laparoscopic surgery
-
Q Are your trocars compatible with J&J and Medtronic staplers diameter?
A Yes.All the stapler equipment should comply the national standard. The stapler relaods tolerance ±0.2mm, The reload staple height 2.0/2.5/3.5mm recommed 12mm size trocar. The reload staple height4.mm recommmed 15mm size trocar.
-
Q If you’re to use 5mm instrument into 10.8mm trocar; will it leak?
A No, Microcrue Trocar with double valves,sealing cap make good air tightness. Testing by 4kPa pressure,still no leak
The lab test in below:
Close the vent valve of the trocar,plug at the end of the trocar sleeve. Gas injection 4kapa,Submerge the Trocar sleeve in water for one min.The result is no gas leak, could prove the double valves make good air tightness.
Close the vent valve of the trocar, plug at the end of the trocar ,Gas injection 4kapa,Submerge the Trocar sleeve in water for one min,take out the trocar puncture rod. Keep for one min. The result shows bubbles less than 20, which proves that the air tightness of the vent valve is good.
-
Q What services do you have ?
A Provide online&offline product training;
Provide market materials to help distributors to open sales channels;
Free samples can be offered to make clinical evaluation for surgeons;
Sponsor local exhibitions&conferences for exclusive distributors.
-
Q Can we get samples before placing an order?Is it free of charge?
A Sure, samples are necessary for clinical evaluation.FOC samples are possible,final sample fees depends on your sample quantity.
-
Q Where do you sell your products now?
A Currently we already registered our products in Singapore HSA,Germany DIMDI,Italy ASL,Spain AEMPS,UK MHRA,Malysia MDA,Thai FDA,Saudi FDA,Iran MOH and Peru DIGEMID etc and we are selling our products in these markets.
